Free shipping on 2+ ★ Made in the USA Fits your exact engine

Outboard Storage Cover vs Running Cover: Which to Use?

Choosing an outboard storage cover vs running cover comes down to one question: is the engine going to be running? A storage cover is built to protect a parked engine and must come off before you start it. A running cover is built to stay on while you drive the boat, so it has to fit tight and let the engine breathe.

That sounds simple, but the two get confused all the time, and mixing them up is how engines end up gasping for air or covers end up in the wake. This guide walks through what each type is built for, why you should never run an engine under a storage cover, and how to use both sensibly through the year. For context, Outer Envy is a small business based in Ocoee, Florida that makes custom-fitted, vented outboard motor covers in the USA for Yamaha, Mercury, Suzuki, Tohatsu and Evinrude engines. Our covers are running covers, so we will be clear below about what they do and what they do not do.

Outboard storage cover vs running cover: what actually differs?

Both types go over the cowl. Past that, they are designed around completely different jobs, and the design choices follow from the job.

What a storage cover is built for

A storage cover exists to protect an engine that is not being used. It is typically a looser fitting, often padded or heavier fabric bag that drops over the whole cowl and sometimes extends down over the midsection. It is usually held on with a drawstring, buckle straps, or a cinch around the lower part of the engine.

The goal is coverage. A storage cover generally tries to close off the cowl completely, including the air intake vents, so rain, bird droppings, pollen, leaves and dust stay out while the boat sits in the driveway, on a lift, or at the marina. Because the engine is off, there is no need for airflow, and closing the vents is a feature rather than a problem.

What a running cover is built for

A running cover exists to stay on while the boat is underway. That changes everything about how it has to be made:

  • It has to fit snug. At speed, wind and spray hit the cowl hard. Any slack fabric becomes a sail that flaps, chafes, and eventually pulls the cover loose. A running cover has to be cut to the cowl shape of a specific engine family so there is very little loose material to catch air.
  • It has to let the engine breathe. Your outboard pulls combustion air in through vents in the cowl. Cover those and you choke the engine. On an Outer Envy cover, the cover sits over the cowl’s own air vents and has its own vents placed over those, so the engine can still breathe.
  • It has to leave the engine working normally. Tilt, trim, steering and access to the cowl latch all need to work the way they did before.

A running cover is something you use while you fish, cruise or run the boat. It also changes how your engine looks, which is a big part of why people buy one. We call ours a statement cover you can run with, not a storage cover. If you want the full detail on running with a cover fitted, we covered that in Can You Run an Outboard With a Cover On?

Why can’t you run the engine with a storage cover on?

This is the mistake worth avoiding above all others. Even a quick idle down the canal with a storage cover in place is a bad idea, for a few reasons rooted in how outboards work.

You block the air intake

A four stroke outboard of a couple of hundred horsepower moves a large volume of air through the cowl when it is working hard. That air comes in through the intake vents at the back or top of the cowl. A storage cover is designed to seal those off. With the intake restricted, the engine cannot pull the air it needs. Depending on the engine and how badly the vents are blocked, you may see rough running, reduced power, warning alarms, or the engine management system pulling power to protect itself. None of that is good for the engine, and none of it is worth the risk.

The cover can get sucked in or blown off

Loose fabric near an intake gets pulled toward it. That can make the airflow problem worse. At speed, the same loose fabric catches wind. Drawstrings and cinch straps are designed to hold a cover on a parked engine in a breeze, not at running speed. Covers that work loose can end up in the water, or worse, wrapped around something you do not want them wrapped around.

Straps and drawstrings near moving parts

Some storage covers cinch down around the midsection or lower cowl. When the engine is running, that is close to steering linkages, trim hardware and, at the bottom, the prop. A loose strap in that area is a hazard. Running covers avoid this by fitting the cowl itself and not relying on long straps below it.

Heat and moisture

Engines throw off heat when they run, and a sealed storage cover holds it in. Even after you shut down, putting a non-breathable storage cover on a hot engine can trap warmth and moisture under the fabric. It is generally better to let the engine cool before you put a storage cover on.

The rule is simple: if a cover was not designed and sold as something you can run with, take it off before you turn the key.

Can you leave a running cover on during storage?

You can leave a running cover on while the boat sits between trips, and for a boat that is used often, that is how plenty of people treat it. But it is worth being honest about what a running cover is and is not.

An Outer Envy cover is a vented, custom-fitted cover you can run with. Because its vents sit over the cowl’s own air vents, it does not seal the engine the way a storage cover tries to. It is not a waterproof cover, and we do not sell it as rust or corrosion protection. Corrosion prevention on an outboard comes from flushing, maintenance and following your engine manual, not from what is draped over the cowl.

The other honest limitation is UV. Any printed or dyed fabric that sits in strong sun will fade over time, and our covers are no exception. In Florida sun especially, a cover parked in direct light day after day will fade faster than one kept out of it. If you are going to lay the boat up for weeks or months, you will get more life out of your running cover by taking it off, cleaning it, and storing it out of the sun. For the bigger picture on what sunlight does to the engine itself, see How UV Rays Destroy Your Outboard Motor.

How to use both covers through the year

The two types are not competitors. They cover different parts of the boat’s life. Here is a practical way to think about it.

When you are using the boat regularly

If the boat goes out most weekends, a running cover makes sense as the cover that lives on the engine. You do not have to pull it off before every launch, and it stays on while you run. If the boat lives in direct sun between trips, consider whether shade, a lift canopy or a full boat cover is available, because that reduces fading on the cover and the engine paint alike.

When you are trailering

Trailering is its own situation. Highway speeds put far more sustained wind on a cover than most boat rides do, and road grit gets thrown up behind the tow vehicle. If you trailer with a storage cover, check that its maker says it is suitable for trailering, and make sure it is tight with no flapping fabric that can chafe the paint. Whatever is on the engine, check it at your first fuel stop.

When the boat is laid up for a while

For a longer layup, this is a sensible routine:

  1. Flush the engine and do whatever your manual calls for before storage, such as fuel treatment or fogging if you are winterizing.
  2. Let the engine cool completely.
  3. Take off the running cover and clean it. Our guide on how to clean your outboard motor cover without damage covers the steps.
  4. Let the running cover dry fully, then store it folded loosely indoors, out of sunlight.
  5. Put a proper storage cover on the engine for the layup.
  6. When the season starts again, remove the storage cover before you start the engine, inspect under the cowl, and refit the running cover.

In much of Florida, boats run year round and there may not be a true layup. In that case the running cover may stay on most of the year, and a storage cover only comes out for long trips away from the boat or hurricane season haul outs.

Which one should you buy first?

It depends on how your boat spends its time.

If the boat sits more than it runs, for example a northern boat that is out for a few months and stored the rest of the year, a good storage cover is the more essential purchase. Its whole job is protecting a parked engine.

If you are on the water often, especially in a warm climate where the boat rarely gets laid up, a running cover gets far more use. It is the one that is actually on the engine while you are out there, and it is the one people see.

Plenty of boaters end up with both, using each for the job it was made for.

Common questions

Can I start my outboard with a storage cover on for a minute?

You should not. Storage covers are designed to close off the cowl, which includes the air intake vents your engine needs to breathe. Always remove a storage cover completely before starting the engine, even for a short warm up.

Is a running cover the same as a waterproof cover?

No. A vented running cover like Outer Envy’s is built to stay on while the boat is running and to let the engine breathe through its vents, not to seal the engine against water. If you need full coverage for a long layup, use a storage cover designed for that job.

Does a vented running cover affect my engine’s air intake?

A properly designed running cover should not block the intake. On an Outer Envy cover, the cover sits over the cowl’s own air vents and has its own vents placed over those, so the engine can still breathe. Early customers ran them and reported no problems.

Will a running cover fade in the sun?

Yes, over time. Like any printed fabric, a running cover will fade with long sun exposure, and strong sun speeds that up. Taking it off and storing it indoors during long layups helps it last longer.

Find the running cover for your engine

If you want a cover that stays on while you run, Outer Envy makes custom-fitted, vented covers for Yamaha, Mercury, Suzuki, Tohatsu and Evinrude outboards, in Grey Fish Scale, American Patriot, Blue Digital Camo, Grey Digital Camo and Solid White. We are rated 4.9 stars from 36 Google reviews, orders ship the same or next business day, shipping is free when you order two or more covers (otherwise $8.95 flat to the continental USA), and every product comes with a 14 day return window from delivery. Browse the covers in our shop and pick the one that fits your engine.

Leave a Reply

Your email address will not be published. Required fields are marked *